pinta Elastomer foil

For air- and water-tight window and facade joints on the exterior, according to EnEV (energy saving regulations)

• data sheet PDF, 172 KB

Warning: Undefined array key "text" in /kunden/641247_80333/rp-hosting/pin-621/pin-abdichtung/html-data/cms/cache/templates_c/4414c9562c03e4c94396dae89bc30b81dcdd27ef_0.file.get.tpl.php on line 116

Warning: Undefined array key "text" in /kunden/641247_80333/rp-hosting/pin-621/pin-abdichtung/html-data/cms/cache/templates_c/4414c9562c03e4c94396dae89bc30b81dcdd27ef_0.file.get.tpl.php on line 121

Warning: Undefined array key "text" in /kunden/641247_80333/rp-hosting/pin-621/pin-abdichtung/html-data/cms/cache/templates_c/4414c9562c03e4c94396dae89bc30b81dcdd27ef_0.file.get.tpl.php on line 126

Warning: Trying to access array offset on value of type bool in /kunden/641247_80333/rp-hosting/pin-621/pin-abdichtung/html-data/cms/cache/templates_c/4414c9562c03e4c94396dae89bc30b81dcdd27ef_0.file.get.tpl.php on line 131

Product information

The pinta elastomer foil permanently enables the installing of air- and water-tight expansion joints on windows and facades according to the requirements of the EnEV (energy saving regulations), without losing any of its essential permanent elasticity.

The pinta elastomer foil is applied on the exterior and is water vapour permeable.

Areas of application

Window and door sealing on the exterior

Colour / Delivery form

• grey

• on rolls

Characteristics

• The quality of the sheets is safeguarded according to DIN EN 13859-2

• Ozone and UV resistant

• compatible with bitumen

• neutral behaviour towards most ordinary construction material

• unaffected by a multitude of chemical and mechanical influences

• to seal brickwork according to DIN 18195-4

Product Advantages

• complete environmental compatibility

• highly ageing resistant

• no additional mechanic fixation necessary (Guidelines for the bonding techniques must be observed)

   

Storage information

Storable vertically in unopened original packaging for 12 months. Keep out of direct sunlight, store dry and cool.

Processing

The material is not to be installed under tension. A tension-free installation needs to be observed. Material and surface should be clean, dry and free of oils, fat and release agents. Please observe the guidelines of the bonding materials strictly. Should lubricants be used to install piping foils, freeing the surfaces completely of release agents before the subsequent bonding is essential. The appropriate use and suitability should be tested through sufficient test-bonding before installation.

Requests / Offers / Orders

Click here E-Mail  or call +49 (0) 5722 8936 - 0.